Easy Fudge Recipe (3 Minutes in Microwave) (2024)

FAQs

Why won t my microwave fudge set? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

The fudge is ready when a candy thermometer reads between 112°C to 114°C (234°F to 237°F) or the mixture forms a soft ball in cold water.

If it's overcooked (resulting in grainy fudge) or undercooked (resulting in poor setting) all you really need to do is add a bit of cream, reheat the fudge to the target temperature, and let it set again.

Homemade Fudge Doesn't Always Set

If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.

Without stirring or agitating the pot, allow the fudge to cool to 130°F (54°C)—or even lower! Harold McGee says that “candy texture is affected by the syrup temperature at which crystallization begins,” and this is the temperature where the seeds can form correctly.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

According to most recipes, the ingredients of fudge are cooked to what is termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

What makes Mackinac Island fudge? ›

The team has the process down pat: One person weighs the ingredients—raw chocolate from Germany, sugar from Bay City, and cream and butter—into a copper kettle set over a propane gas burner. The maker constantly stirs with an oak paddle until the sugary mixture reaches a roaring boil, about 16 to 17 minutes.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Undercooked. This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft.

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using. Some people skip the water and just add cream to the mixture to reheat.

Graining can be caused by stirring the fudge mixture during the cooling process or not adding enough fluid to dissolve the sugar. The trick to fixing graininess is to melt the sugar crystals to give them another chance at setting properly.

No thermometer, boiling, or worrying about if the fudge will set up in humid weather. It's super quick. While it does need to sit in the fridge to set up, it comes together in minutes, literally! And once it's set, you can store it in the fridge or leave it at room temperature.